BPJXP - 4140, THREADWELL CUTTING TOOLS COMPOSITE TO

  • MSDS: BPJXP
  • Manufacturer: BESLY PRODUCTS CORP
  • Product Name: 4140, THREADWELL CUTTING TOOLS COMPOSITE TO
  • National Stock Number: 9510-00N031601
Product Identification

Product ID:4140, THREADWELL CUTTING TOOLS COMPOSITE TO
MSDS Date:11/01/1985
FSC:9510
NIIN:00N031601
MSDS Number: BPJXP

Responsible Party
BESLY PRODUCTS CORPORATION
100 DEARBORN AVE
SOUTH BELOIT, IL 61080
US

Emergency Phone: 815-389-2231

Info Phone: 815-389-2231

Cage: 92061

Contractor
BESLY PRODUCTS CORPORATION
SOUTH BELOIT, IL 61080 US

Telephone: 815-389-2231

Cage: 92061

Ingredients

CHROMIUM

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 0.95%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


IRON (PEL/TLV AS IRON OXIDE FUME)

CAS: 1309-37-1

Fraction By Weight: BALANCE

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293


MANGANESE

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 0.90%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293


MOLYBDENUM (PEL/TLV AS MO, INSOLUBLE COMPOUNDS)

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: 0.20%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9293


CARBON BLACK; (CARBON)

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 0.40%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3


SILICON

CAS: 7440-21-2

RTECS: VW0400000

Fraction By Weight: 0.25%

OSHA PEL 10MG/M3 TDUST;5RDUST

ACGIH TLV: 10 MG/M3 TDUST


SULFUR; (SULPHUR) (PEL/TLV AS SULFUR DIOXIDE)

CAS: 7704-34-9

RTECS: WS4250000

Fraction By Weight: 0.05%

OSHA PEL 2 PPM; 5 STEL

ACGIH TLV: 2 PPM; 5 STEL


PHOSPHORUS (WHITE); (PHOSPHORUS)

CAS: 7723-14-0

RTECS: TH3500000

Fraction By Weight: 0.04%

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.1 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


TOX VIA INTRAPERITONEAL & SUBCUTANEOUS

RTECS: 9999999ZZ


CTL & PERSONAL PROT EQUIP APPROP TO NATURE OF

RTECS: 9999999ZZ


WHEN HNDLG, CUTTING (THERMAL OR MECHANICAL) AND/OR

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:PROD IN FORM SOLD DOES NOT CONSTITUTE
PHYS HAZ/HLTH HAZ. SUBSEQUENT OPERATIONS SUCH AS
ABRAD/MELT/WELD/CUTTING OR PROCESSING IN ANY OTHER FASHION MAY
PRDCE POTENTIALLY HAZ DUST/FUME WHICH CAN BE INHAL ED, SWALLOWED,
OR COME IN CONT W/SKIN/EYES. DETERM ACTUAL EXPOS BY INDUST HYGIENE
MONITORING. ACUTE: (EFTS OF OVEREXP)
Explanation of Carcinogenicity:CHROMIUM: GROUP 1 (NTP), GROUP 1 (IARC).
Effects of Overexposure:EFTS OF OVEREXP: METALLIC TASTE; NAUS, TIGHT OF
CHEST; FEVER; IRRIT OF EYES/NOSE/THROAT & SKIN; LOSS OF
CONSCIOUSNESS/ DEATH DUE TO WELD GASES/LACK OF O2. CHRONIC: NO
ADVERSE EFTS FROM PROD IN THEIR S OLID FORM. ADVERSE EFTS MAY/MAY
NOT RSLT FROM LONG-TERM EXPOS TO DUST/FUME/GASES, ETC BY WAY OF
SUBSEQUENT (SUPP DATA)
Medical Cond Aggravated by Exposure:AGGRAVATION OF PRE-EXISTING
RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR, IF CONDITION CONTINUES, CONSULT
PHYS. EYE: FLUSH WELL WITH RUNNING WATER FOR AT LEAST 15 MIN TO
REMOVE PARTICULATE. GET MED ATTN. SKIN: BRUSH OFF EXCESS DUST. WASH
AREA WIT H SOAP AND WATER. INGEST: SEEK MED HELPIF LARGE QTYS OF
MATERIAL HAVE BEEN INGESTED.

Fire Fighting

Flash Point:NONE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:USE GOOD HOUSEKEEPING PRACTICES TO PVNT ACCUMULATIONS
OF DUST & TO KEEP AIRBORNE DUST CONC @ MINIMUM. MATL IS POTENTIALLY
CONTAM W/COATING SUCH AS OILS FOR PRESERVATIVES & OTHER CONTAM. IF
MATL IS CON TAMD, SPEC PREC (SUCH AS PROCESS(ING 10)

Exposure Controls

Respiratory Protection:IF FUMES, MISTING OR DUST CONDITION OCCURS & TLV
EXCEEDED, PROVIDE NIOSH/MSHA APPROVED RESPIRATORS.
Ventilation:GEN-RECOM (TO KEEP AIRBORNE CONCENTRATION OF DUST/FUMES
BELOW ACGIH TLV'S). LOCAL-AS REQUIRED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EFTS OF OVEREXP:OPERATIONS ON PROD. ING 5: NUISANCE DUST. ING 1: HAS
HIGH PULM TOX & EXPERIMENTAL CAUSE OF NEOPLASM(S) . ING 2:DUST CAN
CAUSE CONJ, CHOROIDITIS, RETINITIS, & SIDEROSIS OF TISSUES. OXID E
FUME CAN CAUSE CHRONIC BRONCH. ING 3:HIGH TOX VIA INTRAPERITONEAL &
INHAL RTS; PRLNG EXPOS CAN CAUSE CNS DAM. (ING 9)

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:5000F,2760C
Melt/Freeze Pt:M.P/F.P Text:2500F,1371C
Spec Gravity:7.8-8.2(H2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:VARIOUS SHAPES, SOLID, ODORLESS METAL.

Stability

Stability Indicator/Materials to Avoid:YES
REACTS WITH STRONG ACIDS TO GENERATE HYDROGEN GAS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:METALLIC OXIDES.

Disposal

Waste Disposal Methods:SOLIDS-SALE AS SCRAP FOR REUSE. DUST, ETC-FOLLOW
FEDERAL, STATE AND LOCAL REGULATIONS FOR REGARDING DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.